MSDS For Nail UV Gel Mercahv

E-mail：hymanzhou2017@gmail.com
Skype  hymanzhou2017
Professional LED/ UV nail gel, ultraviolet/led nail gel polish manufacturer in China 

Mainland.Export all around the world.

Material Safety Data Sheet(MSDS For Nail UV Gel)

Soak off TOP COAT MSDS# 090910**
SECTION 1. IDENTIFICATION
Product name: soak off topcoat Contact Information:+86-755- 2373 5302
Chemical Name: N/A Manufacturer: Mercahv
PRODUCT USE soak off NAIL GEL
SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS
components %
polyurethane acrylate oligomer 30-40
exempt
special acrylate oligomer 10-20
exempt
Ethylene glycol methacrylate 10-20
868-77-9
Trimethylolpropane 20-30
3290-92-4
Butyl Methacrylate 20-30
97-88-1
Photoinitiator 1-5
947-19-3
Photoinitiator 1-5
75980-60-8
D&C Violet #2 0.1-1
81-48-1

SECTION 3. HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW
Physical state: Liquid HEALTH: 1*
Color:transparent FLAMMABILITY: 2
Odor: light PHYSICAL HAZARD: 1
Personal Protection: See Section 8
WARNING: HARMFUL IF SWALLOWED, ABSORBED THROUGH SKIN OR INHALED.
DO NOT SPRAY. DO NOT HEAT.
MAY CAUSE ALLERGIC SKIN REACTION.
CAUSES EYE, SKIN AND RESPIRATORY TRACT IRRITATION
Relevant routes of exposure: Skin, Inhalation, Eyes
Potential Health Effects
Skin contact: Contact skin will cause irritation.
Eye contact: Contact with eyes will cause irritation.
SECTION 4. FIRST AID MEASURES
Inhalation: Remove to fresh air. If symptoms develop and persist, get medical attention.
Skin contact: Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing
and shoes. Wash clothing before reuse. Get immediate medical attention if symptoms occur.
Eye contact: Immediately flush eyes with plenty of water for at least 15 minutes. Get immediate medical attention.
Ingestion: Do not induce vomiting. Keep individual calm. Get medical attention immediately.

SECTION 5. FIRE-FIGHTING MEASURES

Flash point: 87°C
Autoignition temperature: Not available
Flammable/Explosive limits-lower %: Not available
Flammable/Explosive limits-upper %: Not available
Extinguishing media: Foam, dry chemical or carbon dioxide.
Special fire fighting procedures: Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Unusual fire or explosion hazards: Uncontrolled polymerization may occur at high temperatures resulting in explosions or rupture of storage containers.
Hazardous combustion products: Oxides of carbon. Oxides of nitrogen. Irritating organic vapors. Toxic fumes.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Environmental precautions: Remove sources of ignition. Prevent product from entering drains or open waters.
Clean-up methods: Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Soak up with inert absorbent. Store in a partly filled, closed container until disposal.

SECTION 7. HANDLING AND STORAGE

Handling: Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. DO NOT heat or spray. Use only with adequate ventilation. Refer to Section 8. Use only in area provided with appropriate exhaust ventilation.
Storage: For safe storage, store at or below 26°C (80°F). Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Incompatible products: Refer to Section 10.
SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls: Local exhaust ventilation is recommended when general ventilation is not sufficient to control airborne contamination below occupational exposure limits.
Respiratory protection: Use COSHA approved respirator if there is potential to exceed exposure limit(s). If this material is handled at elevated temperatures or under mist forming conditions, without engineering controls, a COSHA approved respirator must be used.
Skin protection: Use impermeable gloves and protective clothing as necessary to prevent skin contact. Neoprene gloves.
Eye/face protection: Safety goggles or safety glasses with side shields. In a splash hazard environment, chemical goggles should be used in combination with a full face shield.

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Physical state: Liquid Color: transparent
Odor: light Vapor pressure: Not available
pH: Not applicable Boiling point/range: Greater than 93°C (200°F)
Melting point/range: Not available Specific gravity: 1.10
Vapor density: Not available Evaporation rate: Not available
Solubility in water: Slight Partition coefficient (n-octanol/water): Not available
VOC content: Total volatiles 0.80 %
SECTION 10. STABILITY AND REACTIVITY
Stability: Stable under normal conditions of storage and use.
Hazardous polymerization: May occur.
Hazardous decomposition products: Oxides of carbon. Oxides of nitrogen. Dimethylamine. Irritating organic vapors.
Incompatability: Strong acids. Strong oxidizing agents. Bases.
Conditions to avoid: Heat, flames, sparks and other sources of ignition. Do not heat above 26°C(80°C).

SECTION 11. TOXICOLOGICAL INFORMATION

Carcinogen Status
Hazardous components
NTP Carcinogen
IARC Carcinogen
COSHA Carcinogen
polyurethane acrylate oligomer
NO
NO
NO
special acrylate oligomer
NO
NO
NO
Trimethylolpropane
NO
NO
NO
Butyl Methacrylate
NO
NO
NO
D&C Violet #2
NO
NO
NO
Photoinitiator
NO
NO
NO
Ethylene glycol methacrylate
NO
NO
NO
Literature Referenced Target Organ & Other Health Effects
Hazardous components
Health Effects/Target Organs
polyurethane acrylate oligomer
No Records
special acrylate oligomer
No Records
Trimethylolpropane
No Records
Butyl Methacrylate
No Records
D&C Violet #2
No Records
Photoinitiator
No Records
Ethylene glycol methacrylate
No Records
SECTION 12. ECOLOGICAL INFORMATION
Ecological information: Not available

13. DISPOSAL CONSIDERATIONS

Information provided is for unused product only.
Recommended method of disposal: Dispose of according to P.R.C, province and local governmental regulations.
ECE hazardous waste number: Not a RCRA hazardous waste.
SECTION 14. TRANSPORT INFORMATION
The shipping classifications in this section are for non-bulk packaging only (unless otherwise specified). Shipping classification may be different for bulk packaging.
P.R.C Department of Transportation Ground :
Proper shipping name: Unrestricted
Hazard class or division: None
Identification number: None
Packing group: None
International Air Transportation (ICAO/IATA):
Proper shipping name: Unrestricted
Hazard class or division: None
Identification number: None
Packing group: None
WaterTransportation (IMO/IMDG):
Proper shipping name: Unrestricted
Hazard class or division: None
Identification number: None
Packing group: None
Marine pollutant: None

SECTION 15. REGULATORY INFORMATION

P.R.C Regulatory Information
All components are listed or are exempt from listing on the Toxic Substances Control Act Inventory.

SECTION 16. OTHER INFORMATION

DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However, Mercahv NAIL does not assume responsibility for any results obtained by persons over whose methods Mercahv NAIL has no control. It is the user's responsibility to determine the suitability of Mercahv's products or any production methods mentioned herein for a particular purpose, and to adopt such precautions as may be advisable for the protection of property and persons against any hazards that may be involved in the handling and use of any of Mercahv NAIL ‘s products. In light of the foregoing, Mercahv NAIL Corporation specifically disclaims all warranties, express or implied, including warranties of merchantability and fitness for a particular purpose, arising from sale or use of Mercahv NAIL Corporation's products. Mercahv NAIL Corporation further disclaims any liability for consequential or incidental damages of any kind, including lost profits.
E-mail：hymanzhou2017@gmail.com
Skype  hymanzhou2017